ISO 9001:2008 Certified
Peenya, Bengaluru, Karnataka
Send E-mail
Send SMS
Home»Products»

Spring Testers

We are a leading Exporter of computerized version spring testers, motorized version spring testers, manual version testing equipment, horizontal, modular, motorized, horizontal, two column, motorized testers and horizontal, modular with hand wheel spring testers from Bengaluru, India.

REQUEST CALLBACK
Ask Latest Price
We are one among the leading manufacturers and suppliers of a massive range of Computerized Version Spring Testers. These testers help reducing the induced variations during the testing process. Provided with a computer controlled motorized version, these testers offer an excellent performance. To avoid overloading of the torque sensor, these offered computerized version spring testers are further provided with an automatic emergency stop.

Features:

  • Computer controlled motorised version.
  • The system consists of a motorised loading frame with a provision to mount the torque
  • sensor depending on the range of test, spring under test and the display unit.
  • Designed to reduce the induced variations during the testing process. It improves the
  • consistency of results by reducing variations that will occur naturally between different
  • operators and even the same operator at different times.
  • Designed for application of load with minimum physical effort and enhance safety of the
  • operator during the test and assuring more accurate results.
  • Control panel consists of computer, data acquisition unit, AC drive unit and ON/OFF switch.
  • The following operations are controlled through computer
  • High speed control to approach testing point and low speed near the testing point to
  • ensure fast. Accurate and efficient test.
  • Inching operation to set the position of the torque sensor and the test spring
  • Automatic emergency stop to avoid overloading of the torque sensor.
  • Separate display to set the angle value(say 98% of the target value) switchover from high

Applications:

  • Wide range of Torsion Springs, both left or right coiled springs
  • Automotive, Aerospace, Biomedical, switches,
  • Wires, components and fasteners
  • Any type of material testing application that
  • require the measurement of torque and angle

Specifications:
Machine Capacities 20 Nm, 50 Nm , 200 Nm
Maximum distance between two torsion plates 200 mm and OD maximum-80 mm [More than 200 mm distance and higher OD for bigger springs -Optional)
Angle range 99990
Angle resolution 0.1° [optional 0.01°)
Torque sensor ranges 0.2 to 2 N mm 0.5 to 5, 1 to 10, 2 to 20 5 to 50, 10 to 100, 20 to 200 50 to 500, 100 to 1000, 200 to 2000 0.5 to 5 Nm, 1 to 10 Nm, 2 to 20 Nm 5 to 50 Nm, 10 to 100 Nm, 15 to 150 Nm
Torque sensor resolution 0.0001 N mm 0.001 N mm 0.01 N mm 0.1 N mm 0.001 Nm 0.01 Nm
Torque sensor Accuracy 0.5 % of reading from 20-100% of capacity or 0.2% FS



Additional Information:
  • Item Code: STTS-HP-103
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
We are the established manufacturer and supplier of an ample range of Motorized Version Spring Testers, which finds a vast application in biomedical, aerospace, and automotive industries. Known for their motorized loading frame and the consistency of results it offers, it is widely considered among our customers. Used for material testing, it has fetched high demands in the market.

Features:

  • PLC controlled motorised operation
  • High speed control to approach testing point and low speed near the testing point to ensure
  • fast. Accurate and efficient test
  • The system consists of a motorised loading frame with a provision to mount the torque
  • sensor depending on the range of test, spring under test and the display unit.
  • Inching operation to set the position of the torque sensor and the test spring
  • Automatic emergency stop to avoid overloading of the torque sensor.
  • Separate display to set the angle value (say 98% of the target value) switch over from high
  • speed to low speed for accurate measurement of target value

Applications:

  • Wide range of Torsion Springs, both left or right coiled springs
  • Automotive, Aerospace, Biomedical, switches,
  • Wires, components and fasteners
  • Any type of material testing application that
  • require the measurement of torque and angle

Overview:

  • Suitable for Torsion spring testing
  • Hand wheel action allows fine positioning and better motion control
  • Simultaneous display of Torque and angle
  • ISO and QS standards require that the process or test to be accurate and repeatable from one operator to the other. They require gauge repeatability and reproducibility test to ensure that, the different operators will achieve similar results
  • Range: 2 Nmm to 150 Nm

 

Specifications:
Machine Capacities 2 to 150000 N mm (150 Nm)
Maximum distance between two torsion plates 200 mm and OD maximum-80 mm [More than 200 mm distance and higher OD for bigger springs -Optional]
Angle range 99990
Angle resolution 0.1° [optional 0.01°)
Torque sensor ranges 0.2 to 2 N mm 0.5 to 5, 1 to 10, 2 to 20 5 to 50, 10 to 100, 20 to 200 50 to 500, 100 to 1000, 200 to 2000 0.5 to 5 Nm, 1 to 10 Nm, 2 to 20 Nm 5 to 50 Nm, 10 to 100 Nm, 15 to 150 Nm
Torque sensor resolution 0.0001 N mm 0.001 N mm 0.01 N mm 0.1 N mm 0.001 Nm 0.01 Nm


Additional Information:
  • Item Code: STTS-HP-102
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
We are reckoned for manufacturing and supplying Manual Version Testing Equipment that is extensively used in the aerospace and automotive industries. Accurate in results, it is widely considered among our valued patrons. The provided rigid frame ensures the perfect alignment between the two plates that further avoids the measurement errors. This offered equipment is further known for its longer functional life.

Features:

  • Manually operated table top model.  Horizontal rigid test stand with two rails to provide precision guidance
  • The system consists of tailstock, worm &worm wheel gear box, along with provision to mount display unit
  • Torque sensor depending on the range of test, angle encoder, spring to be tested and the
  • Adjustable locking system allows the cross head to be free or fixed.
  • Rigid frame is designed to ensure a perfect alignment between the two plates of twist to avoid measurement errors
  • Simultaneous display of Torque and angle values using torque sensor and angle encoder

Applications:

  • Wide range of Torsion Springs, both left or right coiled springs
  • Automotive, Aerospace, Biomedical, switches Wires, components and fasteners
  • Any type of material testing application that
  • require the measurement of torque and angle

 Specifications:
Machine Capacities 20 Nm, 50 Nm & 200 Nm
Maximum distance between two torsion plates 200 mm and OD maximum-80 mm [More than 200 mm distance and higher OD for bigger springs -Optional)
Angle range 99990
Angle resolution 0.1° [optional 0.01°)
Torque sensor ranges 0.2 to 2 N mm 0.5 to 5, 1 to 10, 2 to 20 5 to 50, 10 to 100, 20 to 200 50 to 500, 100 to 1000, 200 to 2000 0.5 to 5 Nm, 1 to 10 Nm, 2 to 20 Nm 5 to 50 Nm, 10 to 100 Nm, 15 to 150 Nm
Torque sensor resolution 0.0001 N mm 0.001 N mm 0.01 N mm 0.1 N mm 0.001 Nm 0.01 Nm
Torque sensor Accuracy 0.5 % of reading from 20-100% of capacity or 0.2% FS
Operating Voltage 220 ± 10% VAC
Operating Temperature 10 8C to *55eC



Additional Information:
  • Item Code: STTS-HP-101
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
We offer a Horizontal, Modular, Motorized Testers that is known for its adjustable speed rate. Efficient in offering better accuracy and reproducibility tests, it is highly acclaimed among our customer-base. Manufactured under the stringent supervision of the professionals, we guarantee the premium quality of the entire range of the testers.

Features:

  • PLC controlled motorised operation
  • Suitable for Clockwise and counter-clock wise measurements
  • Horizontal, rigid test stand with modular slider to provide precision guidance
  • The system consists of  motorised Worm and worm wheel mechanism for application of
  • torque  along with provision to mount Torque sensor and the component under test
  • Inching operation to set the position of the torque sensor and the test component
  • Control panel consists of START/STOP, INCH-LOW,INCH-FAST,EMERGENCY STOP, ON/OFF
  • push button switches.
  • Facility to set fast and slow movement
  • Designed for application of torque with minimum physical effort and enhance safety of the
  • operator during the test and assuring more accurate results.
  • Test speed 5 to 200 degree per minute continuously adjustable
  • Provision to use different range of torque sensors depending on the test
  • Easy to inter-change the torque sensors
  • Provision to operate  with coarse and fine movement

Applications:

  • It is a simple, most versatile system for dealing with
  • wide range of torsion or torsion Vs angle tests in the
  • production floor or laboratory condition

Overview:

  • Speed rate adjustable
  • For better accuracy, repeatability and reproducibility of tests

Specifications:
Machine Capacities in (1,10) Nm
Max. Distance between two torsional plates 200 mm
Max. dia of the component can be tested 100 mm
Hand wheel travel rate for slider travel 2 mm/ hand wheel revolution
Max. slider travel 250 mm
Angular rate 12° /hand wheel revolution
Test speed 5 to 200 degree / minute continuously adjustable
Atmosphere Designed for use under normal laboratory conditions. Protective measures may be required if excessive dust, corrosive fumes, electromagnetic field or hazardous conditions are encountered.
Operating Voltage 220 ± 10% VAC


Additional Information:
  • Item Code: TTS-MT-102
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
Applications:

  • It is a simple, most versatile system for dealing with wide range of torsion or torsion Vs angle tests in the production floor or laboratory condition

Features:

  • PLC controlled motorised operation
  • Suitable for Clockwise and counter-clock wise measurements
  • Horizontal, rigid test stand with two rails to provide precision guidance
  • The system consists of a frame, screw rod & nut for linear motion, motorised Worm and
  • worm wheel mechanism for application of torque, crosshead travel along with provision to
  • mount Torque sensor and the component under test .
  • Inching operation to set the position of the torque sensor and the test component
  • push button switches.
  • Facility to set fast and slow movement
  • Designed for application of torque with minimum physical effort and enhance safety of the
  • operator during the test and assuring more accurate results.
  • Test speed 5 to 200 degree per minute continuously adjustable
  • Provision to use different range of torque sensors depending on the test
  • Easy to inter-change the torque sensors
  • Provision to operate  with coarse and fine movement

Specifications:
Machine Capacities in (1, 20, 200) Nm
Max. Distance between two torsional plates 200 mm
Max. dia of the component can be tested 100 mm
Hand wheel travel rate for slider travel 2 mm/ hand wheel revolution
Angular rate 12° /hand wheel revolution
Test speed 5 to 200 degree / minute continuously adjustable
Atmosphere Designed for use under normal laboratory conditions. Protective measures may be required if excessive dust, corrosive fumes, electromagnetic field or hazardous conditions are encountered.
Operating Voltage 220 ± 10% VAC



Additional Information:
  • Item Code: TTS-MT-101
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
Overview:

  • Hand wheel action allows fine positioning and better motion control

Applications:

  • It is a simple, most versatile system for dealing with wide range of torsion or torsion Vs angle tests in the production floor or laboratory condition

Features:

  • Hand wheel action allows fine positioning and better motion control.
  • Horizontal, rigid test stand with modular extruded aluminium slide to provide precision guidance
  • Suitable for Clockwise  and counter-clock wise measurements
  • The system consists of Worm and worm wheel mechanism for application of torque by hand wheel operation along with provision to mount Torque sensor
  • Mounting holes for test stand fixing
  • Configured for a variety of torque sensors  and  gripping fixtures
  • Different range of torque sensors  upto 10 Nm  for testing of wide range of products
  • Provision to mount angle encoder with display unit for measurement of angle (optional)
  • Provision for testing the component at three rotational stops or for repetitive application on
  • multiple test points of a given component at preset points (Optional)

Specifications:
Machine Capacities in (1, 10) Nm
Max. Distance between two torsional plates 200 mm
Max. dia of the component can be tested 100 mm
Hand wheel travel rate for slider travel 25 mm/ Lever revolution
Max. slider travel 250 mm
Angular rate 12° /hand wheel revolution
Atmosphere Designed for use under normal laboratory conditions. Protective measures may be required if excessive dust, corrosive fumes, electromagnetic field or hazardous conditions are encountered.


Additional Information:
  • Item Code: TTS-HT-102
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
Applications:

  • It is a simple, most versatile system for dealing with wide range of torsion or torsion Vs angle tests in the production floor or laboratory condition

Atmosphere:

  • Designed for use under normal laboratory conditions. Protective measures may be required if excessive dust, corrosive fumes, electromagnetic field or hazardous conditions are encountered

Features:

  • Hand wheel action allows fine positioning and better motion control.
  • Horizontal, rigid test stand with two rails to provide precision guidance
  • Suitable for Clockwise  and counter-clock wise measurements
  • The system consists of two column loading frame, screw rod & nut for linear motion, Worm and worm wheel mechanism for application of torque, cross head travel with hand wheel operation along with provision to mount Torque sensor
  • Mounting holes for test stand fixing
  • Configured for a variety of torque sensors  and  gripping fixtures
  • Different range of torque sensors  upto 200 Nm  for testing of wide range of products
  • Provision to mount angle encoder with display unit for measurement of angle (optional)
  • Provision for testing the component at three rotational stops or for repetitive application on multiple test points of a given component at preset points (Optional)

Specifications:
Machine Capacities in
Max. Distance between two torsional plates 200 mm
Max. dia of the component can be tested 100 mm
Hand wheel travel rate for slider travel 2 mm/ hand wheel revolution
Angular rate 12° /hand wheel revolution


Additional Information:
  • Item Code: TTS-HT-101
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
Overview:

  • Suitable for endurance testing of springs Adjustable stroke speed and length
  • Built in settable cycle countertop set required no. of cycles and to indicate completed no. of cycles
  • Various models of motorized version, hydraulic version, pneumatic version or cam type version depending on the customers' requirement.

Applications:

  • Disc Springs
  • Diaphragm Springs
  • Belleville  Washers
  • Disc Washers
  • Spring forms
  • Shock absorber
  • Rubber
  • Gasket and seals
  • Helical Springs
  • Conical Springs
  • Shock Absorber
  • Filter Assembly
  • Speed Drive Assemblies
 
Features:

  • Computer controlled motorised version.
  • High-stiffness  loading frame with  precision alignment through linear bearings and two column design for more accurate results
  • Control panel consists of computer, data acquisition unit, AC drive unit and On/Off switch
  • The following operations are controlled through computer
  • Facility to set endurance cycle to maximum of 10 lakh cycle (as per requirement) Facility to test spring maximum of 150mm length  (as per requirement)
  • Facility to set the stroke maximum of 50-60mm on the crank shaft through screw
  • Provided with 10 strokes/min for 2 - 4 Springs at a time

Specifications:
Machine Capacities in N 1000, 2000, 5000, 10000, 20000
Depth day light (depending on Max. length and deflection of spring) in mm Either 200, 300, 400 500 or 1000 depending on the spring to be tested
Crosshead travel (displacement range) in mm Either 200, 300, 400 500 or 1000 depending on the spring to be tested
Displacement resolution in mm 0.001 (1 micron), 0.005 ( 5 micron), 0.01 (10 micron)
Load cell ranges in N 0.2 to 2 0.5 to 5, 1 to 10, 2 to 20 5 to 50, 10 to 100, 20 to 200 50 to 500, 100 to 1000, 200 to 2000 500 to 5000, 1000 to 10000 2000 to 20000
Load cell resolution in N 0.0001 0.001 0.01 0.1 1
Load cells Accuracy 0.5 of reading from 20-100% of capacity or 0.2% FS
Parallelism between stationary platform and load cell plate. <20 nmm
Operating Voltage 220 ± 10% VAC


Additional Information:
  • Item Code: SFTS-HE-101
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
Applications:

  • Compression & Tension Springs
  • Disc Springs
  • Diaphragm Springs
  • Belleville  Washers
  • Disc Washers
  • Spring forms
  • Shock absorber
  • Rubber
  • Gasket and seals
 
Features:

  • Computer  controlled motorised  version
  • High-stiffness  loading frame with  precision alignment through linear bearings and two column design for more accurate results
  • Designed to reduce the induced variations during the testing process It improves the consistency of results by reducing variations that will occur naturally between different operators and even the same operator at different times
  • Designed for application of load with minimum physical effort and enhance safety of the operator during the test and assuring more accurate results
  • The system consists of a motorised loading frame with a provision to mount the loadcell depending on the range of test, spring under test and the display unit
  • Control panel consists of computer, data acquisition unit, AC drive unit and ON/OFF switch

Specifications:
Machine Capacities in N 1000, 2000, 5000, 10000, 20000
Depth day light (depending on Max. length and deflection of spring) in mm Either 200, 300, 400 500 or 1000 depending on the spring to be tested
Crosshead travel (displacement range) in mm Either 200, 300, 400 500 or 1000 depending on the spring to be tested
Displacement resolution in mm 0.001 (1 micron), 0.005 ( 5 micron), 0.01 (10 micron)
Load cell ranges in N 0.2 to 2 0.5 to 5, 1 to 10, 2 to 20 5 to 50, 10 to 100, 20 to 200 50 to 500, 100 to 1000, 200 to 2000 500 to 5000, 1000 to 10000 2000 to 20000
Load cell resolution in N 0.0001 0.001 0.01 0.1 1
Load cells Accuracy 0.5 of reading from 20-100% of capacity or 0.2% FS
Parallelism between stationary platform and load cell plate. <20 |imm
Operating Voltage 220 ± 10% VAC
Operating Temperature +10 °C to +55°C



Additional Information:
  • Item Code: SFTS-HP-107
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
Applications:

  • Compression & Tension Springs
  • Disc Springs
  • Diaphragm Springs
  • Belleville  Washers
  • Disc Washers
  • Spring forms
  • Rubber
  • Gasket and seals
  • And many more applications related to Load Vs Displacement

Features:

  • PLC controlled motorised operation
  • High-stiffness  loading frame with  precision alignment through linear bearings and
  • two column design for more accurate results.
  • High speed control to approach testing point and low speed near the testing point to ensure fast.
  • Accurate and efficient test.
  • Inching operation to set the position of the loadcell and the test spring
  • Automatic emergency stop to avoid overloading of the loadcell.
  • Separate display to set the displacement value(say 98% of the target value) switch over from high
  • speed to low speed for accurate measurement of target value.
  • button switches. AC drive unit and potentiometer to set First speed and second speed.
  • Designed to reduce the induced variations during the testing process. It improves the consistency of
  • results by reducing variations that will occur naturally between different operators and even the
  • same operator at different times.
  • Designed for application of load with minimum physical effort and enhance safety of the operator

 

Specifications:
Machine Capacities in N 1000, 2000, 5000, 10000, 20000
Depth day light (depending on Max. length and deflection of spring) in mm Either 200, 300, 400 500 or 1000 depending on the spring to be tested
Cross head travel (displacement range) in mm Either 200, 300, 400 500 or 1000 depending on the spring to be tested
Displacement resolution in mm 0.001 (1 micron), 0.005 ( 5 micron), 0.01 (10 micron)
Load cell ranges in N 0.2 to 2 0.5 to 5, 1 to 10, 2 to 20 5 to 50, 10 to 100, 20 to 200 50 to 500, 100 to 1000, 200 to 2000 500 to 5000, 1000 to 10000 2000 to 20000
Load cell resolution in N 0.0001 0.001 0.01 0.1 1
Load cells Accuracy 0.5 of reading from 20-100% of capacity or 0.2% FS
Parallelism between stationary platform and load cell plate. <20 nmm
Operating Voltage 220 ± 10% VAC



Additional Information:
  • Item Code: SFTS-HP-104
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
Applications:

  • Compression & Tension Springs
  • Disc Springs
  • Diaphragm Springs
  • Belleville  Washers
  • Disc Washers
  • Spring forms
  • Rubber
 
Features:

  • PLC controlled motorised operation
  • High-stiffness  loading frame with  precision alignment through linear bearings and two column design for more accurate results
  • High speed control to approach testing point and low speed near the testing point to ensure fast
  • Accurate and efficient test
  • Inching operation to set the position of the loadcell and the test spring
  • Automatic emergency stop to avoid overloading of the loadcell
  • Separate display to set the displacement value(say 98% of the target value) switch over from high speed to low speed for accurate measurement of target value
  • Designed to reduce the induced variations during the testing process It improves the consistency of results by reducing variations that will occur naturally between different operators and even the
  • Same operator at different times
  • Designed for application of load with minimum physical effort and enhance safety of the operator

Specifications:
Machine Capacities in N 1000, 2000, 5000, 10000, 20000
Depth day light (depending on Max. length and deflection of spring) in mm Either 200, 300, 400 500 or 1000 depending on the spring to be tested
Crosshead travel (displacement range) in mm Either 200, 300, 400 500 or 1000 depending on the spring to be tested
Displacement resolution in mm 0.001 (1 micron), 0.005 ( 5 micron), 0.01 (10 micron)
Load cell ranges in N 0.2 to 2 0.5 to 5, 1 to 10, 2 to 20 5 to 50, 10 to 100, 20 to 200 50 to 500, 100 to 1000, 200 to 2000 500 to 5000, 1000 to 10000 2000 to 20000
Load cell resolution in N 0.0001 0.001 0.01 0.1 1
Load cells Accuracy 0.5 of reading from 20-100% of capacity or 0.2% FS
Parallelism between stationary platform and load cell plate. <20 nmm
Operating Voltage 220 ± 10% VAC



Additional Information:
  • Item Code: SFTS-HP-103
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
Applications:

  • Compression & Tension Springs
  • Disc Springs
  • Diaphragm Springs
  • Belleville  Washers
  • Disc Washers
  • Spring forms
  • Rubber
  • Gasket and seals

Features:

  • Table top model Machine with self supporting table optional
  • High-stiffness  loading frame with  precision alignment through linear bearings and two column design for more accurate results.
  • The system consists of a loading frame , rack & pinion mechanism with hand lever, along with provision to mount loadcell depending on the range of test, spring to be tested and the display unit
  • Lever action provides for quick testing at high speed
  • Simultaneous display of load and displacement values using loadcell and optical scale
  • Suitable for testing compression, tension springs.
  • Mechanical and electronic over load protection for all range of load cells
  • All digital electronics for reliability, durability, and measurement accuracy
  • Different range of load cells enables testing of wide range of springs with sufficient accuracy
  • Easy to inter-change the load cells

Specifications:
Machine Capacities in N 20. 50. 100, 200, 500
Depth day light 150 mm
Crosshead travel 70 mm
Displacement resolution in mm 0.001 (1 micron), 0.005 ( 5 micron), 0.01 (10 micron)
Load cell ranges in N 0.2 to 2 0.5 to 5, 1 to 10, 2 to 20 5 to 50, 10 to 100, 20 to 200 50 to 500
Load cell resolution in N 0.0001 0.001 0.01 0.1
Load cells Accuracy 0.5 of reading from 20-100% of capacity or 0.2 % FS
Parallelism between stationary platform and load cell plate. <20 nmm
Operating Voltage 220 ± 10% VAC
Operating Temperature +10 °C to +55°C



Additional Information:
  • Item Code: SFTS-HP-102
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
Overview:

  • Suitable for compression and Tension spring testing
  • Hand wheel action allows fine positioning and better motion control
  • Simultaneous display of load and deflection
  • Compensated for deflection of the Loadcell and the frame through microprocessor for better accuracy

Applications:

  • Compression & Tension Springs
  • Disc Springs
  • Diaphragm Springs
  • Belleville  Washers
  • Disc Washers
  • Spring forms
  • Rubber
  • Gasket and seals

Features:

  • Table top model.  Machine with self supporting table optional
  • High-stiffness  loading frame with  precision alignment through linear bearings and two column design for more accurate results
  • The system consists of a loading frame , worm &worm wheel gear box, crosshead travel mechanism, along with provision to mount loadcell depending on the range of test, spring to be tested and the
  • display unit
  • Simultaneous display of load and displacement values using loadcell and non-contact optical scale
  • Tare facility for load and displacement
  • Suitable for testing compression, tension springs
  • Hand wheel action allows fine positioning and better motion control
  • Mechanical and electronic over load protection for all range of load cells
  • All digital electronics for reliability, durability, and measurement accuracy
  • Different range of load cells enables testing of wide range of springs with sufficient accuracy
  • Easy to inter-change the load cells

Specifications:
Machine Capacities in N 1000, 2000, 5000, 10000
Depth day light (depending on Max. length and deflection of spring) in mm Either 200, 300, 400 500 or 1000 depending on the spring to be tested
Crosshead travel (displacement range) in mm Either 200, 300, 400 500 or 1000 depending on the spring to be tested
Displacement resolution in mm 0.001 (1 micron), 0.005 ( 5 micron), 0.01 (10 micron)
Load cell ranges in N 0.2 to 2 0.5 to 5, 1 to 10, 2 to 20 5 to 50, 10 to 100, 20 to 200 50 to 500, 100 to 1000, 200 to 2000 500 to 5000, 100 to 10000
Load cell resolution in N 0.0001 0.001 0.01 0.1 1
Load cells Accuracy 0.5 of reading from 20-100% of capacity or 0.2% FS
Parallelism between stationary platform and load cell plate. <20 (imm


Additional Information:
  • Item Code: SFTS-HP-101
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
Specifications:

  • Machine Capacities in N: 500, 1000, 2000
  • Depth day light: 300 mm [more optional]
  • Cross head travel: 250 mm [more optional
  • Range: 500 N, 1000 N, 2000 N

 Overview:

  • Speed rate adjustable
  • For better accuracy, repeatability and reproducibility of tests
  • ISO and QS standards require that the process or test to be accurate and repeatable from one operator to the other. They require gauge repeatability and reproducibility test to ensure that, the different operators will achieve similar results


Additional Information:
  • Item Code: FTS-MT-103
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
Specifications:
digital display unit to choose 100 mm
Resolution to choose 0.001 mm ( 1 micron) 0.005 mm (5 micron) 0.01 mm ( 10 micron)
Accuracy 0.01 mm 0.02 mm 0.02 mm



Additional Information:
  • Item Code: FTS-MT-102
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
Specifications:

  • Machine Capacities in N: 2000
  • Max. Vertical travel: 100 mm
  • Max. throat depth: 100 mm (approx,)
  • Hand wheel rotation: 2.5 mm/ revolution
  • Max. column height: 600 mm
  • Operational column height: 350 mm
  • Range: 500 N, 1000 N, 2000 N, 5000 N

Overview:

  • Hand wheel action allows fine positioning and better motion control


Additional Information:
  • Item Code: FTS-HT-104
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
Specifications:

  • Machine Capacities in N: 500,1000
  • Max. Effective travel: 250 mm
  • Hand wheel travel rate
  • Total height without hand wheel: 400 mm
  • Nominal Dimensions: 450 x 150 X 250 mm
  • Range: 500 N, 1000 N, 2000 N, 3000 N


Additional Information:
  • Item Code: FTS-HT-103
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
Specifications:

  • Dimensions: 450 x 150 X 250 mm
  • height: 400mm0
  • Gauge Load: 76mm
  • Max Efferct: 250mm
  • Range: 500 N, 1000 N


Additional Information:
  • Item Code: FTS-HT-101
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
Specifications:

  • Resolution to choose: 0.001 mm ( 1 micron)
  • Accuracy: 0.01 mm
  • gauge resolution: 0.0001
  • Lever travel rate: 50 mm/ revolution
  • Range : 500 N, 1000 N, 2000 N

Overview:

  • Quick acting lever suitable for fast comparative checks.


Additional Information:
  • Item Code: FTS-LT-103
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
Specifications:

  • Starting point above base plate: 100 mm
  • Operational column height choose: 500 mm
  • Range: 500 N


Additional Information:
  • Item Code: FTS-LT-102
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
Specifications:

  • Throat depth: 76 mm (approx)
  • LEVER travel rate: 50 mm/ revolution
  • Total height: 400 mm
  • Dimensions: 450 x 150 X 250 mm
  • Range: 500 N


Additional Information:
  • Item Code: FTS-LT-101
Yes! I am Interested
View PDF
REQUEST CALLBACK
Ask Latest Price
Specifications:

  • Manual: Upto 500N
  • Dimensions: 450 x 150 X 250 mm
  • height: 400mm0
  • Gauge Load: 76mm
  • Max Efferct: 250mm


Additional Information:
  • Item Code: SSTD-100A
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
Specifications:

  • Motorised:  Upto 20kN.
  • Dimensions: 450 x 150 X 250 mm
  • height: 400mm0
  • Gauge Load: 76mm
  • Max Efferct: 250mm


Additional Information:
  • Item Code: SSTD-300M
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
We are supplier of Digital Spring Testing Systems. The different models available are manually operated, motorized, computerized, hydraulically operated to suit the customers’ requirement. The system is supplied with various capacity interchangeable load cells to accommodate different sizes and capacity of springs to be tested in a single system. System for testing of large size automobile components will also be supplied as per the customer requirement.

Specifications:

  • Net weight: 30kg
  • Power: 220V10PHz
  • Dimension: 500×400×450

Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
Our company manufactures and supplies superior quality of Spring Testers, Digital Spring Testers, Electrical Crimp Testers and its service to customers at highly customized rate. All these products are manufactured by applying highest quality of raw materials, highly experienced staffs with the help of modern machine to maintain the quality of products and unmatched service. All our products are highly reliable, durable and customized. We also manufacture various range of Spring Testers suitable for testing light to heavy springs ranging from load values in grams to 10 tonnes.

Specifications:

  • Input air pressure:0.6-0.8 MPa
  • Fuel pressure:0-45 MPa
  • Fuel tank volume:5000ML

Yes! I am Interested
 
X

Download Brochure
Sushma Industries Pvt Ltd

S. T. Ravi Kumar (Customer Relations - Manager)
Plot No. 18 E, Block- B, 1st C Main Road, II Phase, Peenya Industrial Area, Peenya
Bengaluru - 560058
Karnataka, India
Send Email
© Sushma Industries Pvt Ltd. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited